The mast rotator controls the rotation of the mast relative to the boom.
Set it up by tying one end of the 6’ x ¼” rotation line to the eyestrap on the bottom of the boom near the front.
Lead the other end through the shackle on the back of the mast rotator rod through the mast.
Lead the end back to the eyestrap, and if there is extra line, back to the shackle.
The line should be tie with enough slack that the mast can rotate 30-40 degrees to each side of the boom for a total rotation of 60-80 degrees.
More Assembly Instructions
Basic Assembly | Assembly Check List | Tuning Manual | Jiffy Reefing | Mast Rotator | Genoa Instructions | Trampoline Installation | Mainsail Traveller Control | Roller Furler Installation and Use | Installing Deck Snaps on Cockpit Tent | Reacher Running Rigging Installation