[ Contents | Search | Post | Reply | Next | Previous | Up ]
Date: 16 May 2005
Time: 23:07:44 -0400
The short shaft motors will not work on the 23' Stiletto, you need a 20" shaft, I RECOMMEND AN 8 HP 2-STROKE. You will get good performance and light weight. The beams on most 23's were anodized, and if they are in good condition with little or no corrosion, it is fine to leave them alone and just polish them up. Be sure to check the dolphin striker strap where it is bolted to the main beam, as this is an area of concern for corrosion and possible failure.